Dye distribution in fluorescent-labeled latex prepared by emulsion polymerization

Emulsion polymerizations were used for preparing fluorescent-labeled polymers. The labeled polymers were analyzed by gel permeation chromatography (GPC) using both fluorescence (FL) and refractive index (RI) as detectors. The uniformity of polymer labeling was measured by the ratio between FL and RI signals, calculated by a computer software, on the basis of each GPC chromatogram. It was found that in emulsion polymerizations, the semicontinuous process can produce a more homogenous dye distribution in the host polymer molecules than the batch method. Uniform labeling of a polymer with various dyes can be achieved by the semi-continuous process. However, experimental conditions for polymerization, such as initiator concentration and the presence of surfactant or chain transfer agent, may influence the uniformity of dye distribution. © 1994 John Wiley & Sons, Inc.     

Vapour—liquid equilibria in binary systems formed by N-Methylpyrrolidone with hydrocarbons and hydroxyl derivatives

The vapour—liquid equilibria (VLE) determined by an ebulliometric total pressure method under isothermal conditions for binary systems formed by N-methylpyrrolidone with hexane (333.25 and 343.15 K), dodecane (393.25 K), cyclohexane (333.25 and 354.15 K), methyl-cyclohexane (354.15 and 373.25 K), benzene (333.25 and 354.15 K), toluene (362.15 and 383.35 K), propylbenzene (352.15 and 373.75 K), butylbenzene (352.15 and 373.75 K), propanol-1 (354.15 K), hexanol-1 (351.75 and 393.35 K) and at 393.55 K for cyclohexanol, 4-methylphenol and 2,4-dimethylphenol are reported. The vapour pressures of the pure substances are given. The least squares analysis of VLE data by means of the Redlich-Kister equation is given.     

Design of shaped piezoelectric modal sensor for beam with arbitrary boundary conditions by using Adomian decomposition method

The theory for designing distributed piezoelectric modal sensors is well established for beam structures. However, the current modal sensor theory is limited in scope in that it can only be applied in the case of classical boundary conditions (i.e., either clamped, free, simply supported or sliding). In this paper a solution to the problem of finding the shape of piezoelectric modal sensors for a beam with arbitrary boundary conditions is proposed, using the Adomian decomposition method (ADM). A general expression for designing the shape of a piezoelectric modal sensor is presented, in which the output signal of the designed sensor is proportional to the response of the target mode. Other modes are filtered out. The modal sensor shape is expressed as a function of the second spatial derivative of the structural mode shape function. Based on the ADM and employing some simple mathematical operations, the closed-form series solution of the second spatial derivative of the mode shapes can be determined. Then the shapes of the designed modal sensors are obtained. Finally, some numerical examples are given to demonstrate the feasibility of the proposed modal sensors. It is shown that, for classical boundary conditions, the shapes of the modal sensors based on the ADM agree well with analytical and numerical results given in the literature. For general boundary conditions it is found that the shape of the modal sensors is influenced by the number of modes of interest because the second spatial derivatives of the mode shapes are not orthogonal to one another. The modal sensors for general boundary conditions can be considered as modal filters within a limited frequency band.     

Remarkable effect of the preparation technique on the state of cobalt ions in BEA zeolites evidenced by FTIR spectroscopy of adsorbed CO and NO, TPR and XRD

The state of cobalt in two BEA zeolites was studied by XRD, TPR, and FTIR spectroscopy using CO and NO as probe molecules. One of the samples, CoAlBEA (0.4 wt % of Co), was prepared by conventional ion exchange and the other, CoSiBEA (0.7 wt % Co), by a two-step postsynthesis method involving dealuminated SiBEA zeolite. The introduction of Co into SiBEA leads to an increase of unit cell parameters of the BEA structure and to the consumption of silanol groups in vacant T-sites of the dealuminated zeolite. In contrast, no structural changes are observed after incorporation of cobalt into AlBEA by ion-exchange. The reduction temperature of cobalt in CoSiBEA zeolite (1130 K), is much higher than for CoAlBEA and indicates a strong interaction of cobalt ions with SiBEA. Low-temperature CO adsorption on CoAlBEA results in (i) H-bonded CO, (ii) Co(3+)-CO adducts (2,208 cm(-1)) and (iii) a small amount of Co(2+)-CO complexes (2,188 cm(-1)). In agreement with these results, NO adsorption leads to the appearance of (i) NO(+) (2,133 cm(-1), formed with the participation of the zeolite acidic hydroxyls), (ii) Co(3+)-NO (1932 cm(-1)), and (iii) a small amount of Co(2+)(NO)(2) dinitrosyls (nu(s) = 1,898 and nu(as) = 1,814 cm(-1)). Low-temperature CO adsorption on CoSiBEA leads to formation of two kinds of Co(2+)-CO adducts (2,185 and 2,178 cm(-1)). No Co(3+) cations are detected. In line with these results, adsorption of NO reveals the existence of two kinds of Co(2+)(NO)(2) dinitrosyls (nu(s) = 1,888 and nu(as) = 1,808 cm(-1) and nu(s) = 1,878 and nu(as) = 1,799 cm(-1), respectively).     

Cognitive ability experiment with photosensitive organic molecular thin films

We present an optical experiment which permits us to evaluate the information exchange necessary to self-induce cooperatively a well-organized pattern in a randomly activated molecular assembly. A low-power coherent beam carrying polarization and wavelength information is used to organize a surface relief grating on a photochromic polymer thin film which is photoactivated by a powerful incoherent beam. We demonstrate experimentally that less than 1% of the molecules possessing information cooperatively transmit it to the entire photoactivated polymer film.     

Some Remarks on Absolute Mathematics

We calculate Hochschild cohomology groups of the integers treated as an algebra over so-called field with one element. We compare our results with calculation of the topological Hochschild cohomology groups of the integers—this is the case when one considers integers as an algebra over the sphere spectrum.     

Colloidal liquid crystal type assemblies of spheroidal polystyrene core/polyglycidol‐rich shell particles (P[S/PGL]) formed at the liquid‐silicon‐air interface by a directed dewetting process

A method for the preparation of stripe‐like monolayers of microspheroids is described. The particles were obtained from polystyrene core/polyglycidol‐rich shell microspheres by stretching poly (vinyl alcohol) films that contain embedded particles. The stretching was performed under controlled conditions at temperatures above the T_g of the films and particles. The elongated films were dissolved in water, and the microspheroids were subsequently removed and purified from the poly (vinyl alcohol). The aspect ratio (AR) of the particles, which denotes the ratio of the lengths of the longer to shorter particle axes, was determined by the film elongation. The AR values were in the range of 2.9‐7.7. Spheroidal particles with various ARs were deposited onto silicon wafers from an ethanol (EtOH) suspension. The particle concentration and volume of the suspension were the same in each experiment. Evaporation of the EtOH yielded stripes of spherical particles packed into nematic‐type colloidal crystals and assembled into monolayers. The orientation of the stripes after ethanol evaporation was perpendicular to the triphasic (silicon‐ethanol‐air) interface along the silicon substrate. The adsorbed stripes on the wafers were characterized in terms of their interstripe distance (ID), stripe width, and crystal domain size. Nematic‐type spheroid arrangements in the stripes were the dominant structure, which enabled denser packing of the particles into colloidal crystals than that allowed by the smectic‐type arrangements. Furthermore, the number of spheroids adsorbed per surface unit of the silicon wafers was similar for all ARs, but the width and frequency of the spheroid stripes adsorbed on the wafers were different.     

Gas-Phase Synthesis of Triphenylene (C18H12)

For the last decades, the hydrogen-abstraction−acetylene-addition (HACA) mechanism has been widely invoked to rationalize the high-temperature synthesis of PAHs as detected in carbonaceous meteorites (CM) and proposed to exist in the interstellar medium (ISM). By unravelling the chemistry of the 9-phenanthrenyl radical ([C₁₄H₉]^.) with vinylacetylene (C₄H₄), we present the first compelling evidence of a barrier-less pathway leading to a prototype tetracyclic PAH – triphenylene (C₁₈H₁₂) – via an unconventional hydrogen abstraction–vinylacetylene addition (HAVA) mechanism operational at temperatures as low as 10 K. The barrier-less, exoergic nature of the reaction reveals HAVA as a versatile reaction mechanism that may drive molecular mass growth processes to PAHs and even two-dimensional, graphene-type nanostructures in cold environments in deep space thus leading to a better understanding of the carbon chemistry in our universe through the untangling of elementary reactions on the most fundamental level.     

Tailored side‐chain architecture of benzil voltage stabilizers for enhanced dielectric strength of cross‐linked polyethylene

The synthesis and physico‐chemical properties of seven benzil‐type voltage stabilizers are reported. The benzil core is substituted with alkyl chains of different length that are linked to the benzil core via an ester, ether, or tertiary amine group. All additives can be melt‐processed with low‐density polyethylene (LDPE). Fourier‐transform infrared spectroscopy confirms that benzil compounds are not affected by the LDPE cross‐linking reaction induced by dicumyl peroxide. Moreover, a combination of gel content measurements, thermal analysis, and small‐angle X‐ray scattering indicates that the presence of benzil voltage stabilizers does not significantly alter the microstructure of cross‐linked polyethylene (XLPE). Electrical tree inhibition experiments under high‐voltage alternating current conditions show that all investigated additives substantially enhance the dielectric strength of the insulating material at a concentration of only 10 mmol kg^?1. The highest improvement in dielectric strength, of more than 70% with respect to reference XLPE, is obtained with voltage stabilizers, which carry short (methyl) side chains that are linked to the benzil core via an ester or tertiary amine group. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1047–1054